Yaskawa servo motor SGMAH-02A1A4C-E 200V 200W 2.1A 3000r/min in stock
Warning
YASKAWA manufactures component parts that can be used in a wide variety of industrial applications. The selection and application of YASKAWA products remain the responsibility of the equipment designer or end user. YASKAWA accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances should any YASKAWA product be incorporated into any product or design as the exclusive or sole safety control. Without exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All products designed to incorporate a component part manufactured by YASKAWA must be supplied to the end user with appropriate warnings and instructions as to that part’s safe use and operation. Any warnings provided by YASKAWA must be promptly provided to the end user. YASKAWA offers an express warranty only as to the quality of its products in conforming to standards and specifications published in the YASKAWA manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS OFFERED. YASKAWA assumes no liability for any personal injury, property damage, losses, or claims arising from misapplication of its products
Specifications
| Manufacturer: | Yaskawa |
| Series: | Motors |
| Weight: | Ask |
| Approvals: | UL, CE, cUL Recognized |
| Brake: | Yes |
| Brand: | Yaskawa |
| Constant Torque (Lb-In): | 165 |
| Constant Torque (Nm): | 18.6 |
| Constant Torque (Oz-In): | 2,640 |
| Encoder Bit Resolution: | 17 BIT |
| Encoder Type: | Incremental |
| H x W x D: | 10.67 in x 7.09 in x 7.09 in |
| IP Rating: | IP67 |
| kW: | 3 KiloWatts |
| Max Speed: | 3,000 RPM |
| Mounting Type: | Flange Mount |
| Peak Torque (Lb-In): | 400 |
| Peak Torque (Nm): | 45.1 |
| Peak Torque (Oz-In): | 6,400 |
| Rated Speed: | 1500 RPM |
| Series: | SGMGH |
| Servomotor Type: | General Purpose |
| Shaft Seal: | No |
| Subcategory: | Servo |
| Voltage: | 200 VA |
Similar Products
| SGDV-180A15A |
| SGDV-180A25A |
| SGDV-1R6A01A |
| SGDV-1R6A01A+SGMJV-02ADA2C |
| SGDV-1R6A11A |
| SGDV-1R6A15A |
| SGDV-1R6A21A |
| SGDV-1R6A25A |
| SGDV-200A01A |
| SGDV-200A01A00200+SGMGV-30ADV61 |
| SGDV-200A05A |
| SGDV-200A25A |
| SGDV-2R8A01A |
| SGDV-2R8A01A002000 |
| SGDV-2R8A11A |
| SGDV-330A01A |
| SGDV-330A01A+SGMGV-44NDB6C |
| SGDV-330A11A+SGMGV-44ADC61 |
| SGDV-3R8A01A |
| SGDV-3R8A05A |
| SGDV-3R8A11A |
| SGDV-5R5A01A |
| SGDV-5R5A01A+SGMJV-08ADA2C |
| SGDV-5R5A01B00200 |
| SGDV-5R5A11A |
| SGDV-5R5A21A |
| SGDV-7R6A01A |
| SGDV-7R6A05A |
| SGDV-7R6A15A |
| SGDV-8R4D01A |
| SGDV-8R4D01A, |
| SGDV-R70A01A |
| SGDV-R70A11A |
| SGDV-R70A15A |
| SGDV-R70A21A |
| SGDV-R70F21A |
| SGDV-R90A01A |
| SGDV-R90A01A+SGMJV-01ADA21 |
| SGDV-R90A01B002000 |
• Read and understand this manual before installing, operating, or servicing this Drive. All warnings, cautions, and instructions must be followed. All activity must be performed by qualified personnel. The Drive must be installed according to this manual and local codes.
• Do not connect or disconnect wiring while the power is on. Do not remove covers or touch circuit boards while the power is on. Do not remove or insert the digital operator while power is on.
• Before servicing, disconnect all power to the equipment. The internal capacitor remains charged even after the power supply is turned off. Status indicator LEDs and Digital Operator display will be extinguished when the DC bus voltage is below 50 VDC. To prevent electric shock, wait at least five minutes after all indicators are OFF and measure DC bus voltage level to confirm safe level.
• Do not perform a withstand voltage test on any part of the unit. This equipment uses sensitive devices and may be damaged by high voltage.
• The Drive is not suitable for circuits capable of delivering more than the specified RMS symmetrical amperes. Install adequate branch short circuit protection per applicable codes. Refer to the specification. Failure to do so may result in equipment damage and/or personal injury.
• Do not connect unapproved LC or RC interference suppression filters, capacitors, or overvoltage protection devices to the output of the Drive. These devices may generate peak currents that exceed Drive specifications.
• To avoid unnecessary fault displays caused by contactors or output switches placed between Drive and motor, auxiliary contacts must be properly integrated into the control logic circuit.
• YASKAWA is not responsible for any modification of the product made by the user; doing so will void the warranty. This product must not be modified.
• Verify that the rated voltage of the Drive matches the voltage of the incoming power supply before applying power.
• To meet CE directives, proper line filters and proper installation are required.
• Some drawings in this manual may be shown with protective covers or shields removed, to describe details. These must be replaced before operation.
• Observe electrostatic discharge procedures when handling circuit cards to prevent ESD damage.
• The equipment may start unexpectedly upon application of power. Clear all personnel from the drive, motor, and machine area before applying power. Secure covers, couplings, shaft keys, and machine loads before energizing the Drive.
• Please do not connect or operate any equipment with visible damage or missing parts. The operating company is responsible for any injuries or equipment damage resulting from failure to heed the warnings in this manual.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Payment
Credit card on line is available.We also accept payment by P a y p a l,T/T and Western Union.
This item have stock,so can delivery to you within 3 business days after your payment cleared.If ther
is any import duties or taxes,it is the buyer's responsibility.
Warranty
We offer 1 year warranty for this product. If the product is out of working order under proper usage per
instructions manual within the warranty period, please contact us to obtain a merchandise return code and
shipping instruction. Then, send it back at your shipping costs.
After receiving your return item, it will take 7 days for evaluation and investigation. A brand new
replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.
Shipment
Usually, we use FEDEX,DHL,TNT or EMS to deliver the goods, and it take around 4-7 working days to the
destination address. If the destiantion address is the remote area and FEDEX,DHL,TNT,EMS service do not cover
the area, we will use China post air parcel, it will take 20-30 days to your hands.
Insurance is included in the Shipping & Handling costs you paid.
Feedback
Your satisfaction is our goal,please leave 4 or 5 star feedback .Much appreciation in advance.
Please contact with us before leave Neutral feedback or Negative feedback,we'll help you solve all the
problem.Otherwise we will not provide technical support, or other solutions.
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Product Tags:
|
|
200V 200W 2.1A Yaskawa Servo Motor 3000r/ Min SGMAH-02A1A4C-E Images
|
