Mitsubishi MR-J3W-22B AC Servo Drive / Amplifier 2 Channel 170V @ 1.5A 200W Out
Description
| Motor Make | Mitsubishi | Linear Motor Model | LM-LP2A-09M-01F0 |
| Linear Motor Voltage | 200V | Max Thrust | 95N |
| Max Speed | 2.0m/s | Dimensions | ~68 x 129 x 34mm |
| Driver Make | Mitsubishi | Driver Model | MR-J3W-44B |
| Power | 400W | Driver Voltage | 170V |
Brand: MITSUBISHI
Name: A two axis servo drive
Model: MR-J3W-44B
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3W series (a two axis servo amplifier).
Rated output A axis: 400w.
Rated output B axis: 400w.
Interface type: SSCNET type III fiber communication.
With the same high performance, multi functionality and practicality of the MR-J3-B servo amplifier,
Each MR-J3W-B servo amplifier can be used to rotate the servo motor,
Combined control of any two kinds of linear servo motor and direct drive servo motor.
The installation area can be reduced by 25% to 17% compared with two MR-J3-B servo amplifiers.
Therefore, a more compact control system can be constructed.
In addition, the two axes use the same main circuit power supply, control circuit power supply and SSCNET III communication fiber, thus greatly reducing the wiring.
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 2.0kw.
Interface type: SSCNET type III fiber communication.
Full closed loop control.
Power specification: three phase AC400V.
High precision and high response location control.
Full closed loop control can be realized by double feedback control method MITSUBISHI MR-J3W-44B.
Dual feedback control can be performed between the servo motor encoder and the load side encoder MR-J3W-44B
MR-J3-B-RJ006 can be used in conjunction with a number of manufacturers of linear encoder,
Users can build the system according to their own accuracy requirements. ABS type linear encoder using serial interface,
No need to install the battery on the servo amplifier can easily build the absolute position detection system MITSUBISHI MR-J3W-44B.
Flexible system configuration.
Can achieve higher load side positioning accuracy!Motor series: ultra low inertia, low power.
Rated output power: 0.75kw.
Rated speed: 3000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: ultra low inertia is suitable for high frequency operation MITSUBISHI MR-J3W-44B.
Application examples: the insertion device, the assembly machine. Servo motor series: medium inertia, small capacity.
Rated output: 0.85kw.
Rated speed: 1000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
Stable driving of medium capacity and medium inertia type products.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple.
Through the combination of the optimall number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device MR-J3W-44B.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67. The length of the lline: 5M MR-J3W-44B.
IP level: IP65.
Bending life: high bending life.
Electric motor power supply cable for HF-KP/HF-MP series (motor shaft with side extraction).
Contact person:Suki
Email:wtl2502keji@163.com
Skype:wtl2502
Tel:+86-13268302140
| Item | Model Number | Stocked Item | Protection Level |
| 1 | Servo Amplifier Power Connector Set (Insertion Type) For MR-J4-100A or Smaller/MR-J4-100B or Smaller (*1, *2), MR-J40100TM or Smaller | Supplied with Amplifier | - | - |
| Servo Amplifier Power Connector Set (Insertion Type) For MR-J4-200A/MR-J4-200B/MR-J4-350A/ MR-J4-350B (*1, *2), MR-J4-350TM | Supplied with Amplifier | - | - |
| 2 | Servo Amplifier Power Connector Set (Insertion Type) For MR-J4W2-B/MR-J4W3-B (*2, *3) | Supplied with Amplifier | - | - |
Notes:
1. This connector set is not required for 5 kW or larger servo amplifiers since terminal blocks are mounted. Refer to servo amplifier dimensions in this catalog for more details.
2. The wire size shows wiring specification of the connector. Refer to "Selection Example in HIV Wires for Servo Motors" in this catalog for examples of wire size selection.
3. Press bonding type is also available. Refer to "MR-J4W_-_B Servo Amplifier Instruction Manual" for details.
Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping:
We ship worldwid use UPS, FedEx, DHL, or Truck Freight when needed.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT, and other fees applied by their
respective countries.
All shipments are fully insured.
Product Tags:
|
|
AC Servo Amplifier 400W Mitsubishi MR-J3W-44B MELSERVO new and original Images
|
